Application rates and delivery

When using the product, wear cotton overalls buttoned to the neck and wrist and a washable hat and elbow-length PVC gloves. If clothing becomes contaminated with product or wet with spray, remove clothing immediately. If product or spray on skin, immediately wash area with soap and water. Wash hands after use. After each day's use, wash gloves and contaminated clothing.

Mix the required quantity of Premise in water and apply using suitable application equipment to form a complete and continuous treated zone around and under the structure to be protected.  The treated zone may be created using a combination of conventional spraying and trenching as well as soil rodding. Soil injectionequipment (rodding) should only be used where trenching and treating the backfill is not possible.

Perimeter Treatments: If the building construction is slab-on-ground and the slab is regarded as an intact termite barrier then a Premise Perimeter treatment around the
outside of the structure may be employed.  Premise Perimeter treatments should be complete vertical barrier-type treatments applied inaccordance with Australian Standard 3660.2 to the external perimeter of the structure. Concrete paths around the structure should be drilled and injected with Premise solution in order to establish the Premise Perimeter vertical barrier type treated zone at the rates prescribed in the general instructions.